Integrating 5G NR module with ns-3-ai
Contributor: Anuka Hettiarachchi
The Integrating 5G NR module with ns-3-ai project aims to create a high-performance, zero-serialization bridge between the 5G-LENA NR MAC scheduler...
ns-3 is a simulation tool for computer networks.
Contributor: Anuka Hettiarachchi
The Integrating 5G NR module with ns-3-ai project aims to create a high-performance, zero-serialization bridge between the 5G-LENA NR MAC scheduler...
Contributor: Kedar Kisan
The Flexible Network Tester (Flent) is an industry-standard tool for evaluating Bufferbloat and network performance. However, benchmarking simulated...
Contributor: Manmita Das
Design a modular switched Ethernet model capable of simulating 1, 10, and 40 GbE links, with MAC-based auto-learning of I/O ports, support for...
Contributor: Nipuna Dulara
The CTTC 5G-LENA NR module provides a highly detailed and validated simulation of the 5G NR protocol stack within ns-3. However, a critical dimension...
Contributor: Usham Roy
This project enhances 6LoWPAN mesh under routing in ns3 by replacing unconditional flooding with a smarter Trickle based suppression strategy...
Contributor: Boh Jie Qi
The 6LoWPAN-ND (RFCs 4944, 6775, and 8505) is a replacement for IPv6 DAD and NDP for 6LoWPAN networks, and it is important to ensure address...
Contributor: David Lin
The AQM Evaluation Suite is an automated framework based on RFC 7928 that simplifies simulation setup, topology creation, traffic generation,...
Contributor: Shashwat Patni
The aim of this project is to extend the functionality of GlobalRouting to Ipv6, while maintaining minimal code duplication. Global Routing is based...
Contributor: Thiago Miyazaki
Creation of Mobility and Orbit models for LEO Satellites along with a NTN Helper for GEO and LEO Satellites, and an example using the helper...
Contributor: Kavya Bhat
The project aims to implement DHCP for IPv6 (DHCPv6), which is used in IPv6 networks for address configuration on devices, and allows for central...
Contributor: mye280c37
In wireless networking, research utilizing reinforcement learning is on the rise. In response, ns-3 has introduced additional modules like ns3-gym...
Contributor: João Albuquerque
What I aim for the “5G NR module benchmark analysis for distinct channel models” project is to complete it in the available time (175 hours) and...
Contributor: ggrieco
IUNS-3 5G NR is a GSoC '23 medium-size project proposal that offers a general purpose introductory scenario to dive into the 5G New Radio world,...
Contributor: Mu Yuan Shen
The proposed project aims to enhance the ns3-ai module, which provides interfaces between ns-3 and Python-based ML frameworks using shared memory,...
Contributor: Raghuram Kannan
NetAnim is a tool used to visualize a node's movement and messages between node's. The current NetAnim module implementation has one severe...
Contributor: Zhiheng
The project aims to implement a “Perfect” version of ARP and NDP which produce caches that contain all needed IP address–MAC address mapping. ARP and...
Contributor: Matteo Pagin
Currently, ns-3 provides the TR 38.901 channel model as the default option for sampling MIMO wireless channels which take into account the presence...
Contributor: Ameya Deshpande
The project aims to implement IPv6 Nix-Vector Routing with minimal code duplication from IPv4 Nix-Vector Routing. ns-3 has an implementation of...
Contributor: Parth Pratim Chatterjee
DCE currently makes use of net-next-nuse to extend the Linux kernel internals like the networking stack to host applications but over the years the...
Contributor: Akshit Patel
The project aims to add support for ns-3’s built-in logging to SEM, also allowing the user to visualize the logs on an interactive dashboard. The...
Contributor: Bhaskar Kataria
Phase 1: 1) Add L4S to ns-3 FqCoDel: ECT(1) traffic gets marked at CE_threshold, ECT(0) is marked at the normal CoDel threshold. For now, avoid the...
Contributor: Ananthakrishnan S
There is some inconsitency among the working of NetDevices and IP Interfaces. Ideally when a NetDevice changes it state, it should get reflected in...
Contributor: Deepak K
Scalable congestion controls such as DCTCP improve performance over Reno and Cubic, which perform badly in high-speed networks (because of their slow...
Contributor: Shivamani Patil
Project aims to develop a CI/CD server and add necessary updates to ns-3 AppStore to check if apps/modules available in AppStore build and pass test...
Contributor: Liangcheng Yu
Flow Completion Time (FCT) has been the core metric to optimize via scheduling, congestion control, load balancing in Data Center Networks (DCN). As...
Contributor: Mishal Shah
The project aims to extend the functionalities of the existing AppStore and primarily linking it with the bake build system, so as to support more...
Contributor: Apoorva Bhargava
This project aims at alignment and testing of ns-3 implementation of TCP with Linux kernel. Through rigorous testing various features of TCP like...
Contributor: Tommaso Zugno
In recent years, ns-3 has been widely used for the simulation of wireless networks, because it features several built-in and external modules...
Contributor: muh.iqbal.cr
The LTE and Wi-Fi Coexistence module has been quite popular with ns-3 users. But currently, it is detached from the upstream ns-3-dev and missing...
Contributor: WenYing Dai
Reducing Internet Transport Latency is an interesting research topic and has gained significant attention in the recent past. Some of the promising...
Contributor: Davide Magrin
The envisioned solution consists in the creation of a python library that can start, manage and collect results from multiple simulation runs. In...
Contributor: Jude
ns-3 contains different routing modules, both for IPv4 and for IPv6. None of them is trust-based. Given the increasing interest on trust-based...
Contributor: Sourabh Jain
Direct Code Execution is a framework for ns-3. It allows the users to execute Linux kernel and Linux userspace networking applications inside ns-3...
Contributor: Abhijith Anilkumar
The ns-3 App Store project aims to support modularization of the ns-3 codebase and federation of development activities. Once this project is...
Contributor: Manoj Kumar Rana
MIPv6 is the base standard from the IETF for IP based mobility management in wireless networks. The next generation mobility management schemes are...
Contributor: Shravya K.S.
Recently, there has been a lot of interest in the research community (IRTF / IETF) towards parallely implementing and standardizing a new TCP...
Contributor: tssurya
In PSNs, sometimes it is not possible to distinguish and manipulate different kinds of network flows. For example, we may want to give priority to...
Contributor: ilabdsf
The goal of my project is implementation of handover to secondary cell in LTE with Carrier Aggregation. To make it possible I plan to: Improve...